Volcano Vaporizer Cleaning Video Tutorial
At last here’s a complete video tutorial of taking apart, cleaning and re-assembling the complete Volcano Vaporizer. The video runs 9:45 and is available in full screen. You can also consult the Volcano Vaporizer cleaning photo guide for more detail. Continue reading to start watching the video.
You’ll need replacement screens and o-rings – available from Storz & Bickel. At $28.90 the SOLID VALVE Wear & tear set is a great deal, it includes all wear & tear parts; 1 pc. o-ring set, 1 pc. normal screen set, 1 pc. balloon tube set (3 pcs. x 3m), 1 brush.
UPDATE: I recommend using a glass jar to avoid any possibility of plastic leaching into your wash.
You can also watch at YouTube – Volcano Vaporizer Cleaning Video
Nice video. How often do you clean it?
I don’t have a set timeframe for cleaning. I clean it when it needs to be cleaned… if that makes sense! Depends on what I’ve been putting in it, how often I’ve been using it, etc…
Thank you for your reply. Can you be a bit more specific please? Lets say that I use it twice per day. Do I clean it every week?
I’ve never had to clean it every week, maybe every 2 or 3. You’ll know it’s time to clean because the parts will get gummed up and not work as well as normal. The top screen of the filling chamber is a good indicator.
Does anyone have suggestions on cleaning the top screens of the volcano. Where the heat escapes into the chamber. The “fan/air port” i guess you would call it. Thanks
I use my vacuum. You could also use canned or compressed air to blow it out.
thanks for the swift reply… is it smart to us the compressed ait to blow it down into the vape…or shall i remove the silver cover and expel everything upward?
If I were using compressed air, I’d try and blow accross rather than into the screen. I think the vacuum is the way to go.
I forgot to mention, I often just turn the thing over and give it a firm whack on the bottom. You’d be amazed how much dust can come out.
haha prefect…i will try the upside down tap…i was a little skepticle at first… i dont want to bang anything loose in there. Thanks for the help…this website is great for Volcano Users.
I use simple green on everything from a year old dirty pipes, sissors, all volcano parts, bong bowls and bongs. Anything soaked in simple green rinses clean in 24 hrs
2 things. I forgoe the salt, and just use alcohol. so I can evap the alcohol and harvest oil. Also I tried the aclohol bath on my storz grinder and it started leaching mad plastic. Turned real hazy and cloudy. That plactic makes its way into your oil if you save the alcohol. Plastic is no good for the lungs. Even expensive plastic.
Thank You SO much! These things are (quite) expensive and the retailers are in the dark as to how to use them, clean them etc….You really helped!
Seems to me that you’re discarding valuable essence when you just dump the rubbing alcohol. Me, I save it in a shot-glass and put it aside. After the alcohol evaporates, you’re left with a very pure oil that you can either vape or add to butter. Discarding it entirely seems foolish to this user! I also use zip-ties for the end of the bag- the plastic ties are a pain.
OH MY GOD you didn’t scrape anything with a straw before washing! The resin inside the Volcano is PURE HONEY OIL! Just use a straw! Smear it on a paper or smoke it with a glass hotknife & torch.
Also, I always just use Citrusolve (a citrus based solvent) to clean our Volcano, can wash everything together. Also, an old toothbrush for the hard to reach parts.
I scrape the inside of my chamber regularly (wooden toothpick) and mix it in with the fresh as I load the Volcano. I’m not one for combustion so that’s the best way to use it I’ve found. I’ve always wondered though – how good can the oil really be if it’s been exposed to so much high temp?
Really good! Gets me right whenever we run out lol.
The Oil requires a higher temperature than what u would normally use with the volcano system, so it should be pretty good.
yes everything including the screens the grinder and even the brush comes out in factory new condition, the grinder even has that slicked out chocolate feel to it like it just popped out of injection mold at the factory
Mike – if you like, email pics to vapormaster[**at**]volcanotips.com and I’ll post them here for all to see. Thanks for sharing.
if you ever try this
http://www.harborfreight.com/25-liter-ultrasonic-cleaner-95563.html
you will worship me every time you use it. it only requires hot water (it has built in heater) and hand dishwashing detergent. I will not waste words because there are none that describe the feeling of a miracle that you will experience the first time you use it. It is sold through many outlets and even on ebay under different brands, but I would recommend getting this specific model just because of how much it impressed me with the results.
That is pretty slick…
AWESOME video – thank you it helped me a ton and clarified the whole process…great for the visual learners!
Thank You!
Mini Tip:
If you dry run (empty the chamber) the valve through the vaporizer you will warm the pieces and resins in the chamber. This will make it easier to remove the tamper and metal insert! Don’t run it too long (over 60 seconds); you still need it to be cool enough to handle.